TM3F16GUAI Titan Micro 16Gb SD NAND Flash Chip LGA8 Package 3.3V Embedded Storage

TM3F16GUAI Product Overview

The TM3F16GUAI is a 16Gb (2GB) SD NAND flash memory chip from Titan Micro, in an LGA8 (6.6mm×8mm) package, supporting 3.3V operation. The TM3F16GUAI integrates an SD/MMC interface controller and a NAND flash array internally, presenting a standard SD interface to the host, eliminating the need for complex bad-block management and ECC calculations. The TM3F16GUAI is widely used in IoT edge devices, industrial gateways, smart cameras, drones, and portable multimedia terminals that require large-capacity local storage with strict constraints on PCB area and power consumption. Its standard SD interface is compatible with most MCUs and MPUs, enabling the TM3F16GUAI to provide massive local data storage and management with minimal hardware and software overhead.

TM3F16GUAI Core Features

Capacity: 16Gb (2GB)

Interface: SD/MMC compatible, SPI mode supported

Package: LGA8 (6.6mm×8mm), ultra-compact

Supply Voltage: 3.0V – 3.6V (nominal 3.3V)

Bad Block Management: Built-in ECC and bad-block management, host-independent

Wear Leveling: Internal automatic wear-leveling algorithm

Reliability: Wide operating temperature range suitable for most industrial and outdoor environments

TM3F16GUAI Applications

IoT & Portable Devices: Smartwatches/bands, portable medical devices (e.g., glucometers), Bluetooth earphones, GPS trackers are ideal applications for the TM3F16GUAI.

Industrial Control & Security: Industrial routers/gateways, network cameras, elevator advertising displays can leverage the TM3F16GUAI's compact design and massive storage.

Smart Home & Consumer Electronics: Smart appliances, educational tablets/early-learning machines, drones benefit from the TM3F16GUAI's plug-and-play integration.

AI & Edge Computing: AI glasses, AI products, smart cameras, autonomous driving in-vehicle devices. The TM3F16GUAI is the ideal storage solution for these demanding applications.

TM3F16GUAI Key Advantages

16Gb Massive Storage for Big Data: The TM3F16GUAI's 2GB of storage space easily accommodates OS images, large firmware packages, high-resolution multimedia resources, and long-term device logs, providing unprecedented local storage capability for complex IoT and edge computing applications.

Plug-and-Play, Simplified Development: The TM3F16GUAI's built-in bad-block management and ECC allow the host to read/write via standard SD commands without developing low-level drivers, significantly shortening development cycles.

Ultra-Compact Package, Space-Saving: The TM3F16GUAI's LGA8 package measures only 6.6mm×8mm, delivering several times the storage capacity of previous generations in a nearly identical footprint, ideal for space-constrained high-end wearables and portable devices.

Low-Power Design: The TM3F16GUAI supports sleep and standby modes, effectively extending battery life for battery-powered devices.

Reliable and Stable: The TM3F16GUAI's built-in wear-leveling algorithm extends storage life and ensures long-term data integrity.

Strong Compatibility: The TM3F16GUAI's standard SD interface can directly connect to mainstream MCUs such as STM32, ESP32, and GD32, with simple hardware design and low software migration cost.

Why Choose QIXINWEI

Years of experience in the electronics industry. Trusted by global customers.
Massive In-Stock Inventory – Ready to ship promptly.
BOM Matching Service – One-stop solution, save time.
PCBA Customization – Professional engineering team creates tailor-made solutions based on your needs.
Cost-Effective & Efficient – Better channel, better cost.
A dedicated team makes your procurement smoother.
Contact us for BOM quotes or PCBA inquiries.

FAQ

1. How does the TM3F16GUAI differ from the TM3F4GUAI?
   
   • The TM3F16GUAI has a capacity of 16Gb (2GB), four times that of the TM3F4GUAI (4Gb/512MB), enabling storage of larger firmware, rich multimedia content, and long-term operational data.
   • Package dimensions differ slightly: the TM3F16GUAI is 6.6mm×8mm, while the TM3F4GUAI is 6mm×8mm. Check PCB land pattern compatibility when upgrading.
2. What communication protocols does the TM3F16GUAI support?
   
   • Supports SD mode (1-bit or 4-bit) and SPI mode.
   • Most MCUs can communicate with the TM3F16GUAI via the SPI interface, or use an SDIO interface for higher transfer speeds.
3. How much data can the 16Gb TM3F16GUAI hold?
   
   • The TM3F16GUAI's 16Gb (2GB) capacity can store a complete embedded Linux image, high-resolution video clips, long-term sensor data, or multiple firmware versions.
   • Ideal for edge computing, AI vision, and in-vehicle data recording applications that require massive local storage, making the TM3F16GUAI the perfect fit.
4. Do I need to handle bad-block management for the TM3F16GUAI myself?
   
   • No. The TM3F16GUAI internally integrates bad-block management and ECC error correction. The host only needs to perform read/write operations via standard SD commands, and the TM3F16GUAI automatically handles bad-block replacement and data correction.
5. Is the LGA8 (6.6mm×8mm) package of the TM3F16GUAI difficult to solder?
   
   • The LGA8 used by the TM3F16GUAI is a land-grid-array package; reflow soldering is recommended with appropriate stencil openings and solder paste volume for high yield.
   • Hand soldering the TM3F16GUAI requires a hot air gun or heating platform and is not suitable for direct soldering with an iron. The slightly larger size compared to previous generations has minimal impact on PCB design.
6. What is the operating temperature range of the TM3F16GUAI?
   
   • The TM3F16GUAI supports a wide operating temperature range, suitable for most industrial and outdoor environments. Please refer to the official datasheet for the specific temperature grade.
7. What is the power consumption of the TM3F16GUAI?
   
   • Operating at 3.3V, the TM3F16GUAI features low power consumption in read/write modes and supports sleep mode to further reduce standby current, making it ideal for battery-powered portable devices.
8. Does the TM3F16GUAI support the FAT file system?
   
   • Fully supported. The host can use any standard FAT/FAT32/exFAT file system library to format and manage files on the TM3F16GUAI, exactly the same as with SD cards.
9. Can the TM3F16GUAI directly replace smaller-capacity chips in the same series?
   
   • The TM3F16GUAI package is 6.6mm×8mm, slightly different from the 6mm×8mm of TM3F1GUAI/TM3F2GUAI/TM3F4GUAI. Verify PCB land pattern compatibility before replacement. The software interface is fully compatible for direct code migration.
10. If I need larger capacity than the TM3F16GUAI, what options are available?
    
    • The Titan Micro TM3F series offers multiple capacity options from 1Gb to 512Gb, which can be upward-compatible based on actual needs, such as TM3F32GUAI (32Gb), TM3F64GUAI (64Gb), etc., with consistent packaging and software interfaces.