Item specifics
Description
STM32L052R8T6 Product Overview
STM32L052R8T6 is a Cortex-M0+ MCU at 32 MHz, LQFP-64. 64 KB Flash, 8 KB SRAM, 2 KB EEPROM, USB 2.0 FS device (crystal-less), 12-bit ADC (16 ch), LP timers, RTC, 1×USART, 1×UART, 1×SPI, 1×I2C. Up to 51 x 5 V-tolerant I/Os. 1.8–3.6 V, -40–85 °C. Compared to the 48-pin L052C8T6, the 64-pin package provides more I/Os while maintaining the same low-power, USB, and memory configuration, offering a cost-effective ultra-low-power solution for battery-powered IoT nodes and portable devices needing richer connectivity.
STM32L052R8T6 Core Features
Core: Cortex-M0+ 32 MHz, low-power design
Memory: 64 KB Flash, 8 KB SRAM, 2 KB EEPROM
USB: USB 2.0 FS device (crystal-less)
Analog: 12-bit ADC (16 ch)
Connectivity: 1×USART, 1×UART, 1×SPI, 1×I2C
Timers: LP Timer, GP Timers, RTC
I/Os: 51 (5 V-tolerant)
Package: LQFP-64
Temperature Range: -40°C to 85°C
STM32L052R8T6 Applications
IoT Sensor Nodes: Battery-powered wireless sensors, USB data acquisition modules
Portable Devices: Wearables, portable medical devices, USB peripherals
Industrial Metering: Water, gas, and electricity meters
Consumer Electronics: Remote controls, e-labels, smart cards
Energy Harvesting with More I/Os: Self-powered systems using energy harvesting
STM32L052R8T6 Key Advantages
Ultra-Low Power + USB: Crystal-less USB integrated while maintaining extremely low power consumption
64 KB Flash + 2 KB EEPROM: Ample program space and data-logging capability
51 I/Os in LQFP-64 Package: Rich pins for multi-peripheral connectivity
32-bit Performance, 8-bit Price: Enjoy the ARM ecosystem at a very low cost
5 V-tolerant I/Os: Enhanced robustness, simplified level shifting
Full Ecosystem Compatibility: Easy development with STM32CubeIDE/HAL/LL libraries
Why Choose QIXINWEI
Years of experience in the electronics industry. Trusted by global customers.
Massive In-Stock Inventory – Ready to ship promptly.
BOM Matching Service – One-stop solution, save time.
PCBA Customization – Professional engineering team creates tailor-made solutions based on your needs.
Cost-Effective & Efficient – Better channel, better cost.
A dedicated team makes your procurement smoother.
Contact us for BOM quotes or PCBA inquiries.
FAQ
1. What is STM32L052R8T6 and what does it focus on within the STM32L0 series?
STM32L052R8T6 is an ultra-low-power 32-bit MCU from STMicroelectronics' STM32L0 series, built around an Arm® Cortex®‑M0+ core in an LQFP‑64 package. Operating at 32 MHz, it provides 64 KB Flash and 8 KB SRAM, and integrates a segment LCD driver and a 12‑bit ADC. Compared to the L053 series, it omits the USB module to deliver segment display and ultra‑low‑power analog acquisition at an even lower cost, making it ideal for battery‑powered devices that require a local segment display but no USB connectivity.
2. What are the key specifications of STM32L052R8T6?
Core: Arm® Cortex®‑M0+, up to 32 MHz
Memory: 64 KB Flash, 8 KB SRAM
Operating Voltage: 1.65 V to 3.6 V
Temperature Range: -40 °C to +85 °C (industrial grade)
I/O Count: up to 51
Package: LQFP‑64 (10 mm × 10 mm)
3. How does STM32L052R8T6 differ from STM32L053R8T6? Why doesn't it have USB?
The core difference is that the L052 series removes the USB 2.0 full‑speed device controller, while the L053 retains it. Beyond that, both share the same segment LCD driver, ADC, and ultra‑low‑power modes. If your application does not need to communicate with a PC or smartphone via USB, the L052 delivers the same segment display and analog acquisition capabilities at a lower cost, making it a perfect fit for fixed‑installation devices such as water meters, gas meters, and thermostats.
4. What practical applications can the 64 KB Flash and 8 KB SRAM combination support? Is it sufficient?
The 64 KB Flash can accommodate a lightweight RTOS, a segment display driver, and typical sensor acquisition and communication stacks (e.g., UART, I²C, SPI master/slave). The 8 KB SRAM requires careful variable management and task stack sizing, but is entirely workable for relatively fixed‑function applications like smart meters and temperature/humidity monitors. If larger RAM is needed, upgrade to a higher‑end STM32L0 variant such as the STM32L073.
5. How many segments can the built‑in LCD driver handle, and does the display stay on in low‑power modes?
Its LCD controller supports up to 8 common lines and 28 segment lines (8 COM × 28 SEG), driving a maximum of 224 segments—ample for meter panels with numeric readouts, units, and simple icons, without any external driver IC. Even when the MCU enters Stop mode, the LCD can keep refreshing using its own independent clock and internal boost circuitry, achieving an always‑on display with minimal power draw, which is highly beneficial for battery‑powered metering devices.
6. How low is the power consumption? What are the typical currents across its modes?
Temperature Range: -40 °C to +85 °C
Ultra‑low‑power modes:
Standby mode: ~0.27 µA (no RTC)
Stop mode: ~0.4 µA (no RTC), ~0.8 µA with RTC
Run mode: ~88 µA/MHz
7. What analog peripherals are integrated on the chip? Is there a DAC?
It includes a 12‑bit ADC (up to 16 external channels), an ultra‑low‑power comparator, and a segment LCD driver. There is no built‑in DAC. If analog voltage output is required, you can use a PWM channel with an external RC low‑pass filter to generate low‑frequency analog signals, or connect a low‑cost external DAC chip (e.g., MCP4725) via I²C/SPI.
8. Without USB, how can I perform firmware updates and data exchange?
Although the L052 lacks USB, it provides up to three UARTs and abundant SPI/I²C interfaces. You can implement firmware updates and data communication through these methods: ① use a UART with an external USB‑UART converter for programming and data transfer; ② connect a wireless module (e.g., LoRa, Bluetooth) via SPI for over‑the‑air updates; ③ use I²C to connect a display or sensor for local data exchange. These approaches are equally mature and reliable.
9. What development tools are needed for the STM32L052R8T6? Is there a suitable evaluation board?
ST provides free STM32CubeMX for graphical configuration and STM32CubeIDE as an integrated development environment, along with the STM32CubeL0 firmware library. Debugging and programming are handled by ST‑Link debuggers. For rapid prototyping, the NUCLEO‑L053R8 board (which carries a USB‑enabled L053 chip) is highly compatible—the L052 shares the same segment LCD, ADC, and GPIO peripherals, so code can be easily ported by simply disabling USB‑related modules.
10. If I later need USB functionality or more memory, what upgrade options are available?
If you need to add USB communication, you can upgrade to the pin‑compatible STM32L053R8T6 (64 KB Flash, adds USB), or choose the STM32L073RZT6 (192 KB Flash, 20 KB SRAM, with USB and DAC). In all these upgrade paths, the PCB design can remain unchanged, and core code is largely reusable—only pin configuration and peripheral parameters need adjustment in STM32CubeMX.