NCP3170ADR2G 4.5V-18V Input 3A Synchronous Buck Regulator IC Chip 500kHz SOIC-8

Part number:
NCP3170ADR2G
Device Type:
Synchronous PWM Buck Regulator
Topology:
Buck
Control Mode:
Current Mode
Input Voltage Range:
SPI / Dual-SPI / Quad-SPI
Output Voltage Range:
0.8V ~ 17.28V(Adjustable)
Output Current:
3A(Continuous)
Operating Temperature:
-40°C ~ +85°C
Package:
SOIC-8

NCP3170ADR2G Product Overview

The NCP3170ADR2G is a flexible synchronous PWM step-down switching regulator from onsemi, featuring a current-mode control architecture with an integrated high-side PMOS switch and low-side NMOS switch. It operates from a 4.5V to 18V input voltage range with an adjustable output voltage from 0.8V to 17.28V, delivering up to 3A continuous output load current at a fixed 500kHz switching frequency. Available in a SOIC-8 package, the NCP3170ADR2G integrates soft-start, power good detection, and switching frequency setting internally, requiring a minimum number of external components for a complete buck power supply design. It is widely used in set-top boxes, LCD monitors/TVs, telecom/networking equipment, PCIe graphics cards, and point-of-load (POL) DC/DC converters.


ModelNCP3170ADR2G
Device TypeSynchronous PWM Buck Regulator
TopologyBuck
Control ModeCurrent Mode
Input Voltage Range4.5V ~ 18V
Output Voltage Range0.8V ~ 17.28V (Adjustable)
Output Current3.0 A (Continuous)
Switching Frequency500 kHz (Fixed)
High-Side MOSFET RDS(on)90 mΩ
Low-Side MOSFET RDS(on)25 mΩ
Efficiency (Typical)92%
Duty Ratio Range8% ~ 92%
Output Voltage Accuracy1.5% (Initial)
Quiescent Current1.7 mA
Soft-Start4 ms (Internal Fixed)
Synchronous RectifierYes
Number of Outputs1
Output TypeAdjustable
SwitchBuilt-in
ProtectionsCycle-by-Cycle Current Limit, Short Circuit, OVP, Thermal Shutdown, UVLO
Other FeaturesPower Good Indication, Enable Control, POR, Light Load Efficiency Mode
Operating Temp (TA)-40℃ ~ +85℃
PackageSOIC-8


NCP3170ADR2G Typical Applications

Point of Load (POL) DC/DC Regulator

Set-Top-Box (STB)

LCD-TV / DTV Power

PCIe Graphics Cards

Cable Modems

DVD/Blu-ray Drives and Hard Disks

Telecom / Datacom / Networking Equipment


FAQs:

Q: What are the efficiency and switching frequency?
A: Typical conversion efficiency reaches 92% with a fixed 500kHz switching frequency. The device integrates 90mΩ high-side PMOS and 25mΩ low-side NMOS switches for reduced conduction losses.

Q: What protection features are integrated?
A: Cycle-by-cycle current limiting, short circuit protection, overvoltage protection, thermal shutdown, and input undervoltage lockout (UVLO). The UVLO threshold is typically 4.13V, preventing improper operation from insufficient input voltage.

Q: How is the output voltage set?
A: The NCP3170ADR2G is the adjustable output version with 0.8V to 17.28V range, set via external feedback resistor divider (FB pin). Internal 1.5% precision reference and current-mode compensation simplify loop design.

Q: Does it support light-load efficiency mode?
A: Yes. The device features Light Load Efficiency mode, automatically optimizing efficiency under light-load conditions for standby-power-sensitive applications.


Why Choose QIXINWEI

Years of experience in the electronics industry. Trusted by global customers.

Massive In-Stock Inventory – Ready to ship promptly

BOM Matching Service – One-stop solution, save time

PCBA Customization – Professional engineering team creates tailor-made solutions based on your needs

Cost-Effective & Efficient – Better channel, better cost

A dedicated team makes your procurement smoother.

Contact us for BOM quotes or PCBA inquiries