Item specifics
Description
MB-102 Breadboard Product Overview
The MB-102 breadboard is a standard 830 tie-point solderless experiment board measuring 165×55×10mm for electronic circuit prototyping and testing. Clearly marked with red and blue power lines, it features 2 power rails and 630 independent tie points. Components such as resistors, capacitors, ICs, and wires can be inserted without soldering, allowing quick circuit building and modification. The board comes with self-adhesive tape or mounting holes for secure attachment to workbenches or enclosures. Available with or without packaging, it is an ideal tool for electronics hobbyists, students, and engineers for circuit experimentation and prototyping.
MB-102 Breadboard Core Features
830 Tie Points： Standard 830-tie-point layout including 630 independent tie points and 200 power rail tie points (100 per rail), suitable for medium-scale circuits
Red/Blue Power Rails： One red (+) and one blue (-/GND) power rail on each side, clearly distinguishing power and ground for easy connection
Solderless Contact Structure： High-quality phosphor bronze nickel-plated spring clips provide reliable contact for over 5000 insertions, enabling quick circuit assembly without soldering
Standard Pitch： 2.54mm (0.1 inch) pitch compatible with most electronic components, Dupont wires, and pin headers
Compact Dimensions： 165mm×55mm×10mm – fits moderate-sized circuits, only 10mm thick for portability
Mountable Base： Self-adhesive backing or pre-drilled mounting holes for secure attachment to workbenches, enclosures, or development boards
Interlocking Design： Side grooves and tabs allow multiple breadboards to be joined together for larger circuit areas
Color Identification： Red and blue lines clearly mark power rails; center color coding indicates pin connection patterns
Two Packaging Options： Available with packaging (individual box or blister pack) or without packaging (simple anti-static bag) for different purchasing needs
MB-102 Breadboard Applications
Electronic circuit prototyping (amplifiers, filters, oscillators), microcontroller experiments (Arduino/STM32 peripherals), sensor testing and debugging, teaching demonstrations and electronics competitions, component testing and repair verification, maker DIY projects, graduation project circuit building
MB-102 Breadboard Key Advantages
Solderless Rapid Prototyping： Build and modify circuits without soldering – plug components in and out instantly for quick prototyping and teaching demos
High Reliability Contacts： Spring clip construction provides firm electrical connection with low contact resistance and withstands thousands of insertions
Clearly Marked Power Rails： Red/blue lines greatly simplify power and ground connections, reducing jumper clutter and improving efficiency
Standard Pitch for Wide Compatibility： 2.54mm spacing works with DIP ICs, resistors, capacitors, LEDs, sensor modules, and most standard components
Expandable via Interlocking： Join multiple boards together using side slots for larger, more complex circuits
Multiple Mounting Options： Self-adhesive backing or mounting holes allow attachment to experimental plates, enclosures, or mobile platforms
Cost-Effective： Low cost, reusable thousands of times – a budget-friendly tool for labs, schools, and hobbyists
Why Choose QIXINWEI
Years of experience in the electronics industry. Trusted by global customers.
Massive In-Stock Inventory – Ready to ship promptly
BOM Matching Service – One-stop solution, save time
PCBA Customization – Professional engineering team creates tailor-made solutions based on your needs
Cost-Effective & Efficient – Better channel, better cost
A dedicated team makes your procurement smoother.
Contact us for BOM quotes or PCBA inquiries
FAQ:
What is the MB‑102 breadboard and its key specifications?
The MB‑102 is a solderless experiment board with 830 tie‑points arranged in a standard layout. It features two long red (+) and blue (−) power rails on each side, a central groove for DIP ICs, and numbered rows and columns for easy circuit building. Physical dimensions are approximately 165 mm × 55 mm × 10 mm, and it typically has a peel‑off adhesive backing. The spring‑loaded contacts accept 0.3 mm – 0.8 mm diameter leads (AWG 28–20), making it ideal for prototyping with through‑hole components, jumper wires, and microcontroller boards like Arduino.
How are the internal connections arranged inside the MB‑102?
Inside, metal spring clips connect the holes in a specific pattern. The power rails (the long red and blue lines along the top and bottom) are connected continuously along their entire length — every hole in a red rail is linked together, and the same for the blue rail. In the main component area, each column of 5 holes on either side of the central groove is connected together, but not across the groove. This means a DIP IC can straddle the groove and each pin gets its own independent column of 4 connected holes for wiring.
What wire sizes and component leads can the MB‑102 accept?
The spring contacts are designed for 0.3 mm – 0.8 mm diameter wire, which corresponds to AWG 28 to AWG 20. Standard solid‑core jumper wires (AWG 22–24), resistor leads, capacitor leads, and DIP IC pins all fit perfectly. Using wire thicker than 0.8 mm will permanently deform the clips and cause intermittent connections. Always use solid‑core wire; stranded wire tends to splay and short to adjacent contacts unless the tips are tinned.
What are the maximum voltage and current ratings for circuits on this breadboard?
The MB‑102 is designed for low‑voltage, low‑current electronics. The practical limits are about 30 V DC and 500 mA per contact. The metal clips have a small contact resistance (typically a few milliohms) that causes heating at currents above 1 A. For high‑current or mains‑voltage circuits, a breadboard is not suitable and poses a fire risk. It is best used with microcontrollers, sensors, and small‑signal analog circuits.
Can I use the MB‑102 for high‑frequency or RF circuits?
No, it is not recommended. Above a few MHz, the stray capacitance between adjacent rows (typically 2–5 pF) and the long, unshielded jumper wires cause signal degradation, crosstalk, and oscillations. The breadboard is best suited for DC, low‑speed digital (below 1 MHz), and audio‑range analog circuits. For RF prototyping, use a copper‑clad board with proper grounding (dead‑bug or Manhattan style).
How do I power my circuit on the MB‑102? Can I connect a battery or power supply directly?
Yes. The most convenient method is to use a dedicated breadboard power supply module that plugs directly into the power rails and provides 3.3 V and/or 5 V from a USB or DC barrel‑jack input. Alternatively, you can connect an external battery or bench power supply to the power‑rail strips using banana‑plug to pin adapters or simply by inserting wires into the rail holes. Always double‑check polarity before powering up — reversing power can damage your components instantly.
How can I keep my MB‑102 circuit neat and reliable for long‑term testing?
Use pre‑cut, color‑coded solid‑core wires of the shortest practical length. Route wires flat against the board and avoid crossing over components. Adopt a color convention: red for positive supply, black/blue for ground, and other colors for signals. Press components and wires fully into the board so they seat securely. For semi‑permanent prototypes, screw the breadboard onto a plywood or acrylic base and add cable ties for strain relief. Keep the board clean and free of dust/flux.
Why do my breadboard connections feel loose and cause intermittent faults?
Over time, the spring clips lose tension if thick leads or wires have been repeatedly inserted, or if the board has been exposed to excessive heat. Unfortunately, individual clips cannot be repaired. To extend the life of your breadboard: never force oversized pins (e.g., some voltage regulators or relays), avoid flexing the board while components are inserted, and keep it clean. If a particular hole becomes unreliable, move the connection to a fresh, unused column.
What are the dimensions and weight of the MB‑102, and can I link multiple boards?
The MB‑102 measures 165 mm × 55 mm × 10 mm and weighs roughly 70–90 grams. The sides have small interlocking tabs and slots that allow you to snap multiple boards together to form a larger prototyping surface. The adhesive foam backing can be used to mount it on a base plate. This modular design is very handy when your project outgrows a single board.
What are the most typical applications of the MB‑102 breadboard?
It is the standard prototyping platform for Arduino and Raspberry Pi circuits, sensor and actuator testing, analog amplifier prototyping, digital logic experiments, college engineering labs, and maker/hobbyist projects. Its large 830‑point layout provides enough space for a microcontroller, several sensors, and supporting circuitry, making it the most popular breadboard size for general‑purpose electronics development.