Item specifics
Description
EN5336QI Product Overview
The EN5336QI is a high-performance, highly integrated step-down DC-DC converter from Intel's Enpirion® 5300 series. Utilizing "Power System on Silicon" technology, this device integrates the controller, power MOSFETs, inductor, and compensation components into a compact 44-pin QFN package. As a non-isolated Point-of-Load (PoL) converter, it is specifically designed to meet the precise voltage and fast transient requirements of high-performance, low-power processors, DSPs, FPGAs, ASICs, and memory boards. The EN5336QI offers exceptional integration for modern power designs.
The EN5336QI's core advantages lie in its high integration density and industry-leading power density. It supports a wide input voltage range of 2.375V to 6.6V, offers an adjustable output from 0.75V to 6V, and delivers up to 3A of continuous current. Its 5MHz ultra-high switching frequency enables the use of small ceramic capacitors and achieves a footprint one-third that of competing solutions. This industrial-grade device (-40°C to 85°C) comes in a 10mm x 7.5mm 44-QFN package. The EN5336QI delivers outstanding power density in a tiny footprint.
The Enpirion solution significantly simplifies board design, layout, and manufacturing requirements, reducing system design complexity and cost. The EN5336QI is ideal for space- and efficiency-critical distributed power architectures, widely used in communications, industrial controls, data centers, medical devices, and portable electronics. The EN5336QI is a trusted choice for engineers worldwide.
EN5336QI Core Features
Highly Integrated and Ultra-Compact: Integrates controller, MOSFETs, inductor, and compensation in one package, minimizing external components. Footprint is 1/3rd that of competing solutions. The EN5336QI simplifies board layout dramatically.
High Conversion Efficiency: Delivers up to 93% peak efficiency over a wide load range, reducing power dissipation and thermal stress. The EN5336QI minimizes heat generation in dense systems.
Wide Input and Adjustable Output: Supports 2.375V to 6.6V input, compatible with 2.5V, 3.3V, and 5V rails. Output voltage is adjustable from 0.75V to 6V using an external resistor divider. The EN5336QI offers flexible voltage scaling for various loads.
Comprehensive Protection and Monitoring: Features programmable soft-start, programmable Over-Current Protection (OCP), Over-Temperature Protection (OTP), Over-Voltage Protection (OVP), Short-Circuit Protection (SCP), and Under-Voltage Lockout (UVLO). Includes an enable pin and a Power OK signal for power sequencing. The EN5336QI ensures reliable system operation under fault conditions.
High-Frequency Operation and Low Noise: Fixed 5MHz switching frequency reduces input/output filter size and output voltage ripple, ideal for ripple-sensitive applications. The EN5336QI maintains low output noise for sensitive loads.
Industrial Temperature Range: Supports -40°C to +85°C for harsh operating environments. The EN5336QI operates reliably in extreme thermal conditions.
Package and Compliance: 44-pin QFN (10mm x 7.5mm x 1.9mm), MSL Level 3 (168 hours), RoHS compliant, and supports lead-free manufacturing. The EN5336QI meets all modern environmental standards.
EN5336QI Applications
Point-of-Load Regulation for FPGAs, DSPs, and ASICs: Provides core (VCCINT) and I/O (VCCO) power for high-end FPGAs and processors. The EN5336QI is ideal for powering advanced digital devices.
Communications and Networking: Ideal for broadband access, routers, switches, optical modules, and line cards. The EN5336QI enables efficient power in networking infrastructure.
Industrial and Embedded Systems: Used in industrial PCs, PLCs, test & measurement, and robotics. The EN5336QI offers robust performance in industrial environments.
Data Centers and Servers: Powering memory (DDR) and auxiliary rails in servers and workstations. The EN5336QI supports high-reliability data center applications.
Medical Electronics: Suitable for portable monitors and diagnostic devices due to high reliability and low ripple. The EN5336QI meets the stringent requirements of medical equipment.
Consumer and Edge Computing: Efficient DC-DC conversion for STBs, DVRs, DTVs, and edge nodes. The EN5336QI provides compact power solutions for consumer electronics.
EN5336QI Key Advantages
"Power System-on-Chip" Simplifies Design: Integrates complex inductor and compensation networks internally. Enables high-performance power design with minimal external components and engineering effort. The EN5336QI reduces total design time and risk.
Unmatched Small Footprint: Occupies 2/3 less board space than discrete solutions, freeing up valuable PCB area for higher density designs. The EN5336QI maximizes PCB utilization for compact products.
Superior Transient Response: The 5MHz switching frequency and advanced control architecture ensure stable output voltage for high-end processors under rapid load changes. The EN5336QI provides excellent dynamic performance for modern CPUs.
Streamlined Supply Chain: One component provides the complete power solution, reducing vendor management complexity and total system cost. The EN5336QI simplifies procurement and inventory management.
Proven Enpirion Ecosystem: Backed by Intel's Enpirion brand, offering robust reliability and comprehensive technical support, including reference designs and simulation tools. The EN5336QI benefits from world-class engineering support.
Why Choose QIXINWEI
Years of experience in the electronics industry. Trusted by global customers.
Massive In-Stock Inventory – Ready to ship promptly
BOM Matching Service – One-stop solution, save time
PCBA Customization – Professional engineering team creates tailor-made solutions based on your needs
Cost-Effective & Efficient – Better channel, better cost
A dedicated team makes your procurement smoother.
Contact us for BOM quotes or PCBA inquiries