GD32F427RET6 Product Overview
The GD32F427RET6 is a high-performance 32-bit general-purpose microcontroller (MCU) from GigaDevice, built on the ARM Cortex-M4 core and belonging to the GD32F427 high-performance product series. Housed in a LQFP-64 (10x10mm) mainstream package with 51 I/O pins, the GD32F427RET6 delivers powerful processing capabilities with a 200MHz maximum frequency and 250 DMIPS performance, making it ideal for industrial control, motor drives, and digital power applications. The GD32F427RET6 integrates 512KB of Flash and 256KB of SRAM, and is manufactured using industry-leading 40nm advanced process technology, reducing dynamic and static power consumption while delivering exceptional cost-performance advantages.
GD32F427RET6 Key Features
The GD32F427RET6 features an ARM Cortex-M4 processor with FPU and full DSP instruction set, operating at up to 200MHz with 250 DMIPS processing capability, supporting algorithmically complex embedded applications with faster real-time processing. The GD32F427RET6 is equipped with 512KB on-chip Flash and 256KB SRAM, including 32KB CCM (Core-Coupled Memory) with zero-wait-cycle access. Available in a LQFP-64 (10x10mm) package with 51 I/O pins. The GD32F427RET6 supports a wide operating voltage range of 2.6V to 3.6V and industrial temperature range from -40℃ to +85℃. Integrated three 12-bit ADCs (16 channels total, 1Msps sampling rate) and two 12-bit DACs. Rich timer resources include two 32-bit general-purpose timers, eight 16-bit general-purpose timers, and two 16-bit advanced timers (supporting three-phase PWM complementary outputs and dead-time control). The GD32F427RET6 provides high-speed communication interfaces including USB 2.0 OTG (Full-Speed and High-Speed modes with integrated PHY), 2x CAN2.0B, Ethernet MAC, 3x SPI, 2x I2S, 3x I2C, 4x USART and 2x UART. Built-in DMA controller, temperature sensor, watchdog timer, RTC, hardware CRC, and 96-bit unique device ID. The GD32F427RET6 supports EXMC external memory controller for expandable NOR Flash, SRAM, PSRAM, and NAND Flash. Provides multiple low-power modes including Sleep, Deep-sleep, and Standby.
GD32F427RET6 Applications
With its powerful 200MHz performance, 51 I/O pins, and rich peripheral set, the GD32F427RET6 is widely used in industrial control including PLCs, industrial automation equipment, servo drives, and robot controllers. Motor drives including variable-frequency drives, servo systems, and FOC (Field-Oriented Control) algorithms. Digital power including high-frequency switching power supplies, PV inverter control, and charging station BMS. IoT including smart gateways, edge computing nodes, and data acquisition terminals. Consumer electronics including high-end smart home appliances, gaming peripherals, and multimedia devices. As well as security surveillance, drones, graphic displays, and medical testing equipment. The GD32F427RET6 is a versatile choice for all these demanding applications.
GD32F427RET6 Key Advantages
The GD32F427RET6 delivers powerful processing capability with a 200MHz Cortex-M4 core, FPU and DSP support, delivering 250 DMIPS with code execution efficiency exceeding comparable products at the same frequency, easily handling complex algorithms and real-time control requirements. The 512KB large-capacity Flash with 256KB SRAM provides ample storage for complex applications. The GD32F427RET6's LQFP-64 package offers 51 I/O pins sufficient for most industrial control and motor drive applications. Single-chip integration of 3 ADCs (16 channels), 2 DACs, up to 10 timers, and USB OTG, dual CAN, Ethernet MAC, multiple USART/UART/SPI/I2C communication interfaces greatly simplifies peripheral circuit design for the GD32F427RET6. The GD32F427RET6 is a pin-compatible alternative to STM32F4 series with low code migration cost. The -40℃ to +85℃ wide temperature range makes the GD32F427RET6 suitable for harsh industrial environments. Manufactured using 40nm advanced process technology, effectively reducing dynamic and static power consumption. Supports Keil, IAR and other mainstream IDEs with official firmware libraries and abundant development resources for the GD32F427RET6. GigaDevice, as a leading domestic MCU supplier, ensures stable and reliable supply for the GD32F427RET6.
Why Choose QIXINWEI
Years of experience in the electronics industry. Trusted by global customers.
Massive In-Stock Inventory – Ready to ship promptly
BOM Matching Service – One-stop solution, save time
PCBA Customization – Professional engineering team creates tailor-made solutions based on your needs
Cost-Effective & Efficient – Better channel, better cost
A dedicated team makes your procurement smoother.
Contact us for BOM quotes or PCBA inquiries
FAQ
1 What is GD32F427RET6
The GD32F427RET6 is a 32-bit high-performance MCU from GigaDevice, based on the ARM Cortex-M4 core with integrated FPU and DSP instructions
2 What are the key specifications of the GD32F427RET6
The GD32F427RET6 features a 200MHz CPU, 512KB Flash, 256KB SRAM, 51 I/Os, 3×12-bit ADC, 2×12-bit DAC, operating voltage 2.6V~3.6V
3 What package does the GD32F427RET6 use
The GD32F427RET6 uses an LQFP-64 package, 10mm × 10mm
4 What applications is the GD32F427RET6 suitable for
The GD32F427RET6 is suitable for industrial control, motor drives (FOC algorithm), digital power supplies, PV inverters, IoT gateways, and consumer electronics
5 What development tools support the GD32F427RET6
The GD32F427RET6 is supported by Keil MDK, IAR EWARM, GCC with GD32F4xx AddOn pack; debuggers J-Link and GD-Link are supported
6 What is the operating temperature range of the GD32F427RET6
The GD32F427RET6 operates within -40°C to +85°C
7 What are the key features of the GD32F427RET6
The GD32F427RET6 features FPU and DSP, USB 2.0 OTG (FS/HS with built-in PHY), 2×CAN 2.0B, Ethernet MAC, multiple timers and DMA
8 What peripheral interfaces does the GD32F427RET6 support
The GD32F427RET6 supports 3×SPI, 3×I2C, 3×USART+2×UART, USB OTG, 2×CAN, SDIO, and EXMC external memory controller
9 What are the alternative models for the GD32F427RET6
The GD32F427RET6 is pin-compatible with STM32F4 series; same series options include GD32F427VET6 (LQFP-100) or GD32F427ZET6 (LQFP-144)
10 What are the design considerations when using the GD32F427RET6
When porting from STM32 to the GD32F427RET6, use GD's official firmware library, pay attention to clock configuration differences, and place 100nF decoupling capacitors on VDD pins