Item specifics
Description
GD32F130F8P6TR Product Overview
The GD32F130F8P6TR is a 32-bit general-purpose microcontroller (MCU) from GigaDevice, built on the ARM Cortex-M3 core and belonging to the GD32F130 Value Line product series. Housed in a compact TSSOP-20 package with 15 I/O pins, the GD32F130F8P6TR delivers maximum efficiency with a 72MHz maximum frequency and zero-wait-state Flash access. As a representative of the Value Line products in the GD32 MCU family, the GD32F130F8P6TR delivers 32-bit Cortex-M3 performance at near 8-bit MCU cost, providing a cost-effective entry experience for upgrading from 8-bit/16-bit to 32-bit Cortex-M3 architecture.
GD32F130F8P6TR Key Features
High-Efficiency ARM Cortex-M3 Core: The GD32F130F8P6TR features an ARM Cortex-M3 processor with Harvard architecture, independent instruction and data buses for simultaneous instruction pipelining and data access. The GD32F130F8P6TR operates at up to 72MHz with zero-wait-state Flash access. The GD32F130F8P6TR includes built-in single-cycle multiplier and hardware divider. The GD32F130F8P6TR delivers 74DMIPS performance at maximum frequency, with code execution efficiency 20% higher than comparable Cortex-M3 products and 35% higher than Cortex-M0+ products at the same frequency.
Memory Configuration: The GD32F130F8P6TR is equipped with 64KB on-chip Flash and 8KB SRAM.
Compact TSSOP Package: The GD32F130F8P6TR uses a TSSOP-20 package with 15 I/O pins and 0.65mm pin pitch, ideal for space-constrained PCB designs.
Wide Voltage & Temperature Range: The GD32F130F8P6TR supports 2.6V to 3.6V operating voltage and -40℃ to +85℃ industrial temperature range.
Rich Analog Peripherals: The GD32F130F8P6TR integrates one 12-bit ADC (up to 9 channels).
Comprehensive Timer Resources: The GD32F130F8P6TR provides up to four 16-bit general-purpose timers, one 32-bit general-purpose timer, and one PWM advanced timer.
Standard Communication Interfaces: The GD32F130F8P6TR supports 2 SPI, 2 I2C, and 2 USART.
Rich On-Chip Resources: The GD32F130F8P6TR includes a built-in DMA controller, temperature sensor, watchdog timer, RTC, PWM, IrDA, and LIN bus protocol support.
Multiple Power-Saving Modes: The GD32F130F8P6TR offers various power-saving modes for flexible optimization between wake-up latency and power consumption, especially important for low-power applications.
GD32F130F8P6TR Applications
With its exceptional cost-performance ratio and compact package, the GD32F130F8P6TR is widely used in:
Industrial Control: The GD32F130F8P6TR is ideal for industrial automation, power monitoring and alarm systems
Motor Control & Drives: The GD32F130F8P6TR excels in motor control and e-bike controllers
Consumer Electronics: The GD32F130F8P6TR is used in smart home devices, handheld devices, gaming peripherals, and small appliances
IoT Nodes: The GD32F130F8P6TR is suitable for smart sensors, data acquisition and processing, and IoT end devices
User Interface: The GD32F130F8P6TR enables Human-Machine Interface (HMI)
GPS & Communications: The GD32F130F8P6TR is used in GPS navigation devices and communication gateways
Medical Devices: The GD32F130F8P6TR is applied in portable medical instruments
GD32F130F8P6TR Key Advantages
Ultimate Cost-Performance: As a core model of the GD32F130 Value Line series, the GD32F130F8P6TR delivers 32-bit Cortex-M3 performance at near 8-bit MCU cost.
High-Efficiency Processing: The GD32F130F8P6TR's 72MHz Cortex-M3 core with 74DMIPS performance – code execution efficiency is 20% higher than comparable Cortex-M3 products at the same frequency.
Compact Package Saves Space: The GD32F130F8P6TR's TSSOP-20 small footprint with 15 I/O pins is sufficient for most simple control applications, ideal for space-constrained portable devices and embedded systems.
Rich Peripheral Integration: The GD32F130F8P6TR integrates a 12-bit ADC (9 channels), 4 general-purpose timers, 1 32-bit timer, PWM advanced timer and multiple communication interfaces – greatly simplifying peripheral circuit design.
Industrial-Grade Reliability: The GD32F130F8P6TR operates over -40℃ to +85℃ wide temperature range suitable for harsh industrial environments.
Mature Ecosystem: The GD32F130F8P6TR supports Keil, IAR, and other mainstream IDEs with official firmware libraries, GD32130G-START入门级 learning kit and abundant development resources.
Stable Domestic Supply Chain: The GD32F130F8P6TR is supplied by GigaDevice, a leading domestic MCU supplier, ensuring stable and reliable supply.
Why Choose QIXINWEI
Years of experience in the electronics industry. Trusted by global customers.
Massive In-Stock Inventory – Ready to ship promptly
BOM Matching Service – One-stop solution, save time
PCBA Customization – Professional engineering team creates tailor-made solutions based on your needs
Cost-Effective & Efficient – Better channel, better cost
A dedicated team makes your procurement smoother.
Contact us for BOM quotes or PCBA inquiries
FAQ
1 What is GD32F130F8P6TR
The GD32F130F8P6TR is a 32-bit MCU from GigaDevice, based on the ARM Cortex-M3 core, part of the GD32F130 value-line series
2 What are the key specifications
The GD32F130F8P6TR runs up to 72MHz, has 64KB Flash, 8KB SRAM, 15 I/Os, a 12-bit ADC, and operates from 2.6V~3.6V
3 What package does it use
The GD32F130F8P6TR uses a TSSOP-20 package, measuring 6.5mm × 4.4mm × 1mm, suitable for space-constrained applications
4 What applications is it suitable for
The GD32F130F8P6TR is suitable for industrial control, motor drives, user interfaces, power monitoring, consumer electronics, handheld devices, gaming, GPS, and e-bikes
5 What development tools support it
The GD32F130F8P6TR is supported by Keil MDK, IAR Embedded Workbench, and GCC
6 What is the operating temperature range
The GD32F130F8P6TR operates from -40°C to +85°C, industrial grade
7 What are the key features
The GD32F130F8P6TR includes a 12-bit ADC, up to 5×16-bit timers, 1×32-bit timer, 1×advanced PWM timer, DMA, watchdog, and RTC
8 What peripheral interfaces does it support
The GD32F130F8P6TR supports up to 2×SPI, 2×I2C, and 2×USART
9 What are the alternative models
The GD32F130F8P6TR has performance comparable to STM32F030C8T6; a same series option is GD32F130F4P6 (16KB Flash)
10 What are the design considerations
The GD32F130F8P6TR is discontinued; for new designs, consider alternatives like GD32F330F8P6TR; place a 100nF decoupling capacitor near the VDD pin of the GD32F130F8P6TR