Item specifics
Description
ESP32-C6 Product Overview
The ESP32-C6 is an ultra-low-power multi-protocol wireless System-on-Chip (SoC) from Espressif Systems, supporting 2.4 GHz Wi-Fi 6, Bluetooth 5 (LE), Zigbee 3.0, and Thread 1.3. As Espressif's first Wi-Fi 6 SoC, ESP32-C6 integrates a high-performance RISC-V 32-bit processor (up to 160MHz) and a low-power RISC-V 32-bit processor. Housed in a QFN-40-EP (5×5mm) compact package, it features 512KB SRAM, 320KB ROM, and 16KB low-power SRAM. The ESP32-C6 supports 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5 (LE), Zigbee 3.0, and Thread 1.3 multi-mode wireless communication, with Wi-Fi, Bluetooth, and 802.15.4 coexisting and sharing the same antenna. ESP32-C6 provides 30 programmable GPIOs (QFN40 package), integrating a 12-bit ADC, temperature sensor, and rich peripheral interfaces including SPI, UART, I2C, I2S, RMT, TWAI, PWM, Motor Control PWM, and SDIO. The ESP32-C6 is widely used in smart home, industrial automation, healthcare, consumer electronics, smart agriculture, POS machines, and service robots.
ESP32-C6 Key Features
Multi-Protocol Wireless: Wi-Fi 6 + Bluetooth 5 + Zigbee/Thread: The ESP32-C6 is Espressif's first Wi-Fi 6 SoC, operating in the 2.4 GHz band with 1T1R and data rates up to 150 Mbps. ESP32-C6 supports IEEE 802.11ax with MCS0~MCS9, uplink/downlink OFDMA, downlink MU-MIMO, Beamformee, and Target Wake Time (TWT). ESP32-C6 is also fully compatible with IEEE 802.11b/g/n. ESP32-C6's Bluetooth supports Bluetooth 5 (LE) with Bluetooth 5.3 certification, Bluetooth mesh, rates of 125 Kbps, 500 Kbps, 1 Mbps, and 2 Mbps, advertising extensions, and multiple advertisement sets. IEEE 802.15.4 is compatible with 802.15.4-2015, operating in the 2.4 GHz band with OQPSK PHY at 250 Kbps, supporting Thread 1.3 and Zigbee 3.0.
Dual RISC-V Processor Architecture: ESP32-C6 features a high-performance RISC-V 32-bit processor (up to 160MHz) and a low-power RISC-V 32-bit processor (up to 20MHz). ESP32-C6's low-power processor can operate independently in Deep-sleep mode for low-power tasks.
Large Memory Capacity & Flexible Expansion: ESP32-C6 integrates 512KB SRAM, 320KB ROM, and 16KB low-power SRAM. ESP32-C6 supports external Flash expansion via SPI/QSPI interfaces.
30 GPIOs & Rich Peripherals: ESP32-C6's QFN-40 package provides 30 programmable GPIOs, supporting SPI, UART, I2C, I2S, RMT, TWAI, PWM, Motor Control PWM, and SDIO. ESP32-C6 integrates a 12-bit ADC and temperature sensor. ESP32-C6 supports USB Serial/JTAG controller.
Industrial-Grade Temperature & Low Power: ESP32-C6 operating temperature range of -40℃ ~ +105℃. ESP32-C6 supports Active, Modem-sleep, Light-sleep, and Deep-sleep power modes. Target Wake Time (TWT) optimizes power saving for long battery life.
Comprehensive Hardware Security: ESP32-C6 supports RSA-3072 Secure Boot, AES-128/256-XTS Flash Encryption, Digital Signature, HMAC peripheral, and True Random Number Generator (TRNG). ESP32-C6 integrates Trust Execution Environment (TEE) controller for access permission isolation.
ESP32-C6 Applications
With Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 triple-mode wireless capability, the ESP32-C6 supports Matter, Thread, Zigbee, and other protocols, and is widely used in:
Smart Home & Matter Devices: ESP32-C6 is the core SoC for Matter Wi-Fi end devices and Matter Thread end devices, powering smart lighting (Zigbee remote control), smart locks (Bluetooth unlocking), smart plugs, thermostats, and environmental monitors
Thread/Zigbee IoT Nodes: ESP32-C6 supports Thread 1.3 and Zigbee 3.0 for low-power mesh network nodes
Industrial Automation & Control: ESP32-C6 is used in industrial sensors, equipment monitoring, remote data acquisition
Healthcare Devices: ESP32-C6 is suitable for portable medical devices, health monitors, wearable sensors
Smart Agriculture: ESP32-C6 is used in environmental sensors, smart irrigation control, weather stations
Consumer Electronics: ESP32-C6 is found in smart toys, audio devices, remote controls
General Low-Power IoT Sensor Hubs & Data Loggers: ESP32-C6 is applied in low-power sensor hubs and data loggers
POS Machines & Service Robots: ESP32-C6 supports POS machines and service robots
ESP32-C6 Advantages and Highlights
As Espressif's first Wi-Fi 6 SoC, ESP32-C6 brings next-generation Wi-Fi 6 technology to IoT devices. OFDMA and MU-MIMO enable high-density multi-user concurrent transmission, maintaining low latency and high throughput even in congested networks. Target Wake Time (TWT) significantly extends battery life for battery-powered connected devices.
ESP32-C6's Bluetooth 5 + IEEE 802.15.4 + Wi-Fi 6 in a single chip meets point-to-point (Bluetooth), mesh networking (Thread/Zigbee), and high-speed Wi-Fi connectivity needs. Thread 1.3 and Zigbee 3.0 dual-protocol supportmakes the ESP32-C6 ideal for Matter smart home devices.
ESP32-C6's dual RISC-V processor architecture enables flexible task division — the high-performance processor handles protocol stacks and complex computations, while the low-power processor operates independently in Deep-sleep mode. 512KB SRAM and 320KB ROM provide ample memory for complex applications.
ESP32-C6 integrates comprehensive hardware security including RSA-3072 Secure Boot, AES-128/256-XTS Flash Encryption, Digital Signature, and TEE controller, ensuring full-chain security from boot to operation.
ESP32-C6 has 30 GPIOs and rich peripherals including SPI, UART, I2C, I2S, PWM, and SDIO offer extensive connectivity for sensors, actuators, and expansion modules. The -40℃ ~ +105℃ industrial-grade temperature range ensures reliable operation in harsh environments.
Why Choose QIXINWEI
Years of experience in the electronics industry. Trusted by global customers.
Massive In-Stock Inventory – Ready to ship promptly
BOM Matching Service – One-stop solution, save time
PCBA Customization – Professional engineering team creates tailor-made solutions based on your needs
Cost-Effective & Efficient – Better channel, better cost
A dedicated team makes your procurement smoother.
Contact us for BOM quotes or PCBA inquiries
FAQs:
Question: What is the ESP32-C6 chip?
Answer: ESP32-C6 is an ultra-low-power SoC from Espressif featuring a RISC-V 32-bit single-core processor and supporting 2.4GHz Wi-Fi 6, Bluetooth 5.3, Zigbee 3.0, and Thread 1.3 protocols .
Question: What is the core processor architecture and clock speed?
Answer: ESP32-C6 features a high-performance RISC-V processor running up to 160 MHz, along with a dedicated low-power co-processor running at up to 20 MHz .
Question: What is the internal memory capacity?
Answer: ESP32-C6 includes 320 KB of ROM, 512 KB of HP SRAM, and an additional 16 KB of LP SRAM designed for low-power states .
Question: Which wireless protocols does it support?
Answer: ESP32-C6 supports 2.4GHz Wi-Fi 6 (802.11ax) with backward compatibility, Bluetooth Low Energy 5.3, and the 802.15.4 protocol for Thread and Zigbee .
Question: What is the main difference between ESP32-C6 and ESP32-S3?
Answer: The key difference lies in architecture and wireless capabilities. ESP32-C6 uses RISC-V and introduces Wi-Fi 6, offering lower latency in dense network environments with better power efficiency compared to the S3 .
Question: What security features does it offer?
Answer: ESP32-C6 offers secure capabilities including PSA Certified Level 2, hardware encryption accelerators, secure boot, and flash encryption .
Question: What application scenarios is this chip suitable for?
Answer: ESP32-C6 is ideal for Matter ecosystem devices (smart plugs, lighting), IoT sensor hubs, industrial automation, service robots, and consumer electronics .
Question: Which development environments are supported?
Answer: ESP32-C6 supports the official Espressif ESP-IDF, as well as mainstream environments such as Arduino IDE and MicroPython .
Question: What package and dimensions does it use?
Answer: ESP32-C6 adopts a QFN-40-EP (5x5 mm) package, providing 30 programmable GPIO pins .
Question: How is its low-power performance?
Answer: ESP32-C6 supports Active, Modem-sleep, Light-sleep, and Deep-sleep modes. Power consumption can drop as low as 7 µA in Deep-sleep, while the LP memory remains powered .